The glue for repair, upgrading and creative design for almost every softbait. Not suitable for repairing Z-Man softbaits made of ElaZtech.
Information about Fishing Glue:
Fishing Glue is a special colourless, clear glue for almost all softbaits. Even the gluing of salted & flavoured softbaits succeeds without any problems. The glued area is soft and flexible. The softbait glue does not stick neither to the skin nor to the clothes. It is easy to insert into the holes, tears and cuts of the softbait. Here are some application options:
- For repairing and gluing softbaits, (expensive) swimbaits and other soft plastic baits. The softbait is fully functional again, soft and flexible! Also with smaller softbaits the repair is worthwhile if necessary. You only need a small drop of Fishing Glue per repair!
- New colour combinations are easy to make by cutting up softbaits of different colours and sticking the different coloured tails back on.
- Softbaits can easily be lengthened or shortened by separating or inserting parts of them. You can combine different types of softbaits.
- Or you can now simply repair loved, especially catching softbaits and continue to fish them!
Application
If necessary, clean & dry the area to be bonded beforehand. Apply a sufficient amount of the glue on both sides and completely onto the cut surface to be bonded, into the tear or other area to be repaired, allow to dry for 5 - 10 seconds and then press firmly together. Now smaller corrections are still possible. Remove any excess adhesive immediately. Put the softbait down and let it dry for at least 10 minutes. Then the glued area is normal to strong durable. Basically, the longer the drying time, the more stable the bonding. Therefore our recommendation is to wait at least 1 hour with highly loaded bondings and large softbaits (e.g. Swimbaits > 16 cm). If the jig head or hook channel is to be glued, remove the jig head before gluing & wait at least 1 hour (even longer is better) before using the softbait.
Storage / Shelf life:
The storage and application temperatures should ideally be 10-25°C. If stored below 5°C, the Fishing Glue may crystallize and may therefore not be suitable for temporary use. When heated to room temperature, however, crystallized products can be used again without restriction.
